MCI-CB-1413H
Details
Brand:
Clevite Engine Parts
Manufacturer's Part Number:
CB-1413H
Part Type:
Rod Bearings
Product Line:
Clevite H-Series Rod Bearings
Summit Racing Part Number:
CLE-CB1413H
UPC:
27067865199
Bearing Usage:
Performance
Engine Crankshaft Undersize (in.):
Stock
Engine Crankshaft Undersize (mm):
Stock
Bearing Material:
TM-112
Dowel Pin Hole:
No
Narrow Bearing:
No
Quantity:
Sold individually.
Special Attention:
Fits 1989-2002 applications only.
Clevite H-Series Rod Bearings
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating.
Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
Clevite Engine Parts
Manufacturer's Part Number:
CB-1413H
Part Type:
Rod Bearings
Product Line:
Clevite H-Series Rod Bearings
Summit Racing Part Number:
CLE-CB1413H
UPC:
27067865199
Bearing Usage:
Performance
Engine Crankshaft Undersize (in.):
Stock
Engine Crankshaft Undersize (mm):
Stock
Bearing Material:
TM-112
Dowel Pin Hole:
No
Narrow Bearing:
No
Quantity:
Sold individually.
Special Attention:
Fits 1989-2002 applications only.
Clevite H-Series Rod Bearings
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating.
Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
Fitments
1994_Dodge_Ram 2500_5.9L DIESEL, 1994_Dodge_Ram 3500_5.9L DIESEL, 1995_Dodge_Ram 2500_5.9L DIESEL, 1995_Dodge_Ram 3500_5.9L DIESEL, 1996_Dodge_Ram 2500_5.9L DIESEL, 1996_Dodge_Ram 3500_5.9L DIESEL, 1997_Dodge_Ram 2500_5.9L DIESEL, 1997_Dodge_Ram 3500_5.9L DIESEL, 1998_Dodge_Ram 2500_5.9L DIESEL, 1998_Dodge_Ram 3500_5.9L DIESEL, 1999_Dodge_Ram 2500_5.9L DIESEL, 1999_Dodge_Ram 3500_5.9L DIESEL, 2000_Dodge_Ram 2500_5.9L DIESEL, 2000_Dodge_Ram 3500_5.9L GAS, 2001_Dodge_Ram 2500_5.9L DIESEL, 2001_Dodge_Ram 3500_5.9L DIESEL, 2002_Dodge_Ram 2500_5.9L DIESEL, 2002_Dodge_Ram 3500_5.9L DIESEL