Chevrolet, GMC Steering Idler Arm - Cognito Motorsports Truck - 210-90222

Steering Idler Arm Idler Arm Support And Weld In Gusset 2001-2010 GM HD/01-13 2500 SUV/03-09 H2 The idler pivot is what the idler arm mounts to and pivots about, and the OEM idler pivot has issues with bending the shaft and also bending the tabs on the frame that locate the idler pivot.When these issues happen, the passenger side of the drag link ends up higher in the frame, creating an excessive angle of the passenger tie rod and usually causes tie rod problems. The Cognito Idler Pivot is a much stronger upgrade that has a hardened alloy steel shaft with tapered roller bearings.Also included is a weld in gusset to strengthen the frame tabs in order to keep the steering components moving in their intended positions. Unwanted steering movements and play lead to premature tire and tie rod wear, lower fuel economy, lane wandering and poor steering control. Improved Returnability Rugged high-strength casting, steel spindle and tapered roller bearings Also reduces steering road wander and rut tracking Helps to eliminate Steering Play-extends tire life Bolt-in replacement for the original component Limited Lifetime Warranty Reduces road wander, rut tracking and driver fatigue Provides tighter control of steering, especially on narrow roads Increases overall safety Replaces and, as a result, outlasts the OEM bell crank many times over High-quality tapered roller bearings that remain tight with no side-to-side or vertical movement Design provides for end and side adjustment Hi-Tensile strength casting Greased-packed and sealed roller bearings and spindle Cognito Idler Arm Support Weld In Gusset For 2001-2010 Silverado/Sierra 2500/3500 2WD/4WD, 210-90222 Cognito Idler Arm Support Weld In Gusset For 2001-2010 Silverado/Sierra 2500/3500 2WD/4WD