2.5 Inch Lift Kit - Ford Ranger (19-23) 4WD

Properly level the front of your 2019-2023 Ford Ranger truck by installing this 2.5-inch leveling kit from BDS. Specially designed for the new Ranger this 2.5" leveling kit is engineered for additional tire clearance and improved performance without overextending the suspension or driveline angles at full suspension droop.; To prevent maxing out ball joints or CV damage BDS gets around this issue by using a 2-piece design with a smaller top mounted steel strut spacer in combination with a preload spacer. To further ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates.; The lift kit includes steel top mount strut spacers pre-load spacers differential relocation brackets and custom-tuned NX2 Nitro or FOX Performance series shocks. Give your new Ranger the extra boost with this 2.5" leveling kit from BDS Suspension.R or CR):CR;Prop 65 Short Label:WARNING: Cancer and Reproductive Harm - https://www.p65warnings.ca.gov;Prop 65 Warning Label:p65.jpg;Prop 65 Yes/No:Yes;Title:2.5 Inch Lift Kit - Ford Ranger (19-23) 4WD;Installation Time:4 Hrs;Installation Difficulty:moderate;Installation Tools:35mm Socket Axle Nut Socket-Air Hammer Rec-bit unibit Step Drill Bit-cutOffTool-drill-strutCompressor;Rear Lift Height:0 IN;Front Lift Method:Strut Spacer;Rear Lift Method:Stock;Front Lift Height:2_5 IN;Rear Shock Option:NX2 Nitro Series;Shocks Included:Yes