07-17 Jeep Wrangler (4WD) Suspension Track Bar - Front - Carli Suspension - CS-JATB-07-F

adjustable track bar CS-JATB-07-F Carli Backcountry Shock Set, Remote Reservoir, 2013-23, Ram 3500, Diesel, 4x4 Carli Front Adjustable Track Bar Carli Dominator 3.0 Shock Set, 3.25” Lift, 14-18 Ram 2500, Gas The Carli Adjustable Track bar solves all of the issues commonly associated with weak OEM track bars and is a perfect fit for any Jeep owner with a 2.5"-3" lift lookig for a strong replacement. Carli suspension systems use an adjustable track bar up front and the combination of an adjustable track bar and riser in the rear to correct geometry, center the axles after lifting the JK, and ensure the axle have as little “Yaw,” lateral axle movement causing a wagging feeling during suspension cycling, as possible. Carli adjustable track bars are constructed from ¼-inch wall DOM tubing and use 7/8-inch heat-treated chromoly FK Bearings Heim joints locked in by Carli’s proprietary Jammit nut that provides 100% more surface area than a standard jam-nut. The fixed end of Carli adjustable track bars features our proprietary CUB joint which uses a proven FK Bearings 7/8-inch uniball at its center. Custom molded bushings are pressed on to encapsulate the uniball then the assembly is pressed into the huge, gusseted housing of the track bar with a stainless safety washer and retained with a snap ring. Fits 2007-2017 Jeep JKU 4x4 with 2.5"-3" of lift. 1/4" wall construction and 7/8" FK heim provides rigid strength. Features Carli's signature CUB joint on the frams wide mounting position to minimize vibration and maximize lifespan. Fully rebuildable. Carli Front Adjustable Track Bar for 2007-17 Jeep JKU, CS-JATB-07-F 07-17 JEEP JKU 4X4 FRONT ADJUSTABLE TRACK BAR - 3.0" LIFT Carli Front Adjustable Track Bar for 2007-17 Jeep JKU