Electric Tilt Windshield - Glass - Can-Am Defender HD 8/HD 9/HD 10 - Rough Country - 98418213
Details
Maximum Durability and Visibility. Say hello to a whole new view with Rough Country's Auto-Tilt Glass Windshield for the Can-Am Defender. With its DOT-approved glass and sturdy construction this windshield is less likely to crack or break even when driving through rough terrain. The Auto-Tilt Glass Windshield for Can-Am Defenders is the perfect accessory for your off-road vehicle giving you unobstructed visibility. Our windshield is built to make your ride safer so you can focus on the trail ahead. Heavy-Duty Reliability. The Auto-Tilt Windshield is installed in a durable formed frame that fits the contours of your cage and hood perfectly and can withstand all weather conditions. And with weather seal protection the glass will stay in excellent condition for years to come. It features an easy-to-use rocker switch so you can open the windshield slightly for minimum airflow or fully open it for maximum airflow. The push-button control with dual linear actuators is so easy to use that you can even adjust mid-ride. The glass is built for long-lasting reliability because the rugged design of your Defender deserves a windshield that is just as tough. Installation. Our new Auto-Tilt Glass Windshield can be installed on Can-Am Defender models for a clear view and added protection. The windshield comes with the hardware needed for an easy install that includes some minor drilling. Warranty. Rough Country's Auto-tilt Glass Windshield is backed with a limited lifetime replacement warranty towards manufacturer defects. As such the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's products!
- Frame Dimensions Width: 50.75" Height: 29.5"
- Input Voltage: 12V
- Stroke: from382 (+-3mm) to 586 (+-3mm)
- Force: 410N. Max support 45KGs
- Speed(no load): 10mm/s
- IP Rating: IP65
- Working Temp:-5-50 Deg. C
- Current(full load): 5A
- Glass Dimensions Width: 45.50" Height: 25"
- Designed for year-round riding and fits the contours of your cage and hood perfectly.
- DOT Approved Glass Scratch &
- Impact Resistant
- Electrically actuated with position control Open slightly for airflow or fully open for max airflow.
- Open and close with the push of a button.
- Edge seal creates a seal against the face of the vehicle blocking out most dust and water.
- Easy installation.
- Cylinder Specifications:
Detailed Fitment Results
| Year | Make | Model | Sub Model | Fitment Notes |
|---|---|---|---|---|
| 2016 | Can-Am | Defender XT CAB HD10 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2016 | Can-Am | Defender XT HD10 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2016 | Can-Am | Defender XT HD8 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2016 | Can-Am | Defender DPS HD10 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2016 | Can-Am | Defender DPS HD8 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2016 | Can-Am | Defender HD10 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2016 | Can-Am | Defender HD8 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2017 | Can-Am | Defender MAX HD10 XT | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2017 | Can-Am | Defender MAX HD8 DPS | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2017 | Can-Am | Defender MAX HD8 XT | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2017 | Can-Am | Defender XT CAB HD10 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2017 | Can-Am | Defender XT HD10 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2017 | Can-Am | Defender XT HD8 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2017 | Can-Am | Defender DPS HD10 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2017 | Can-Am | Defender DPS HD5 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2017 | Can-Am | Defender DPS HD8 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2017 | Can-Am | Defender HD10 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2017 | Can-Am | Defender HD10 Mossy Oak Hunting Edition | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2017 | Can-Am | Defender HD5 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2017 | Can-Am | Defender HD8 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2017 | Can-Am | Defender MAX HD10 DPS | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender MAX HD10 Lone Star | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender MAX HD10 XT | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender MAX HD10 XT CAB | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender MAX HD8 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender MAX HD8 DPS | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender MAX HD8 XT | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender XT CAB HD10 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender XT CAB HD8 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender XT HD10 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender XT HD8 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender DPS HD10 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender DPS HD5 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender DPS HD8 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender HD10 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender HD10 Mossy Oak Hunting Edition | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender HD10 X mr | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender HD10 XT-P | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender HD5 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender HD8 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2018 | Can-Am | Defender MAX HD10 DPS | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2019 | Can-Am | Defender MAX HD10 Lone Star | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2019 | Can-Am | Defender MAX HD10 XT | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2019 | Can-Am | Defender MAX HD10 XT CAB | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2019 | Can-Am | Defender MAX HD8 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2019 | Can-Am | Defender MAX HD8 DPS | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2019 | Can-Am | Defender MAX HD8 XT | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2019 | Can-Am | Defender XT CAB HD10 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2019 | Can-Am | Defender XT CAB HD8 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2019 | Can-Am | Defender XT HD10 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2019 | Can-Am | Defender XT HD8 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2019 | Can-Am | Defender DPS HD10 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2019 | Can-Am | Defender DPS HD5 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2019 | Can-Am | Defender DPS HD8 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2019 | Can-Am | Defender HD10 Mossy Oak Hunting Edition | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2019 | Can-Am | Defender HD10 X mr | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2019 | Can-Am | Defender HD10 XT-P | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2019 | Can-Am | Defender HD5 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2019 | Can-Am | Defender HD8 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2019 | Can-Am | Defender MAX HD10 DPS | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2020 | Can-Am | Defender MAX HD10 Lone Star | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2020 | Can-Am | Defender MAX HD10 X mr | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2020 | Can-Am | Defender MAX HD10 XT | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2020 | Can-Am | Defender MAX HD10 XT CAB | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed to 3 / 8" along the front edge to clear windshield movement. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here! " |
| 2020 | Can-Am | Defender MAX HD8 | Base | "Fits with most factory roofs but in some cases requires the roof to be trimmed toFitments
|





