92-99 Jeep Cherokee (Power - Disc/Drum) Differential - Front - Zumbrota Drivetrain - RAA434-1562B
Details
Front Axle Assembly
RAA434-1562B
Ratio: 3.07; Dana 30, 7.12 Inch Ring Gear, With ABS, Without Vacuum Disconnect, includes main housing and internals only, no axles, ball joints, spindles, steering components, or brakes
,3.07,434-1562B,94,99,ASSY,AXLE,CHEROKEE,D30,DIFFS,JEEP,RAA,W/ABS,
Reman Front Axle Assembly, Dana 30, 1994-99 Jeep Cherokee with ABS, 3.07 Ratio
Zumbrota Drivetrain Axle Assemblies are rebuilt to the highest quality standards of precision and reliability. Each Axle assembly is thoroughly inspected for straightness, cracks and surface wear. All internal components are fully inspected and tested including ring and pinions, internal gears, clutches and carriers. All bearings and seals are replaced. Gears are fully inspected for optimal tooth contact patterns and correct rolling torque using inch pound measurements for precise setup and longevity. Correct gear backlash is set to ensure proper gear lubrication and quiet operation. Axle tubes are inspected to ensure OEM standards of straightness. Zumbrota uses an exclusive hydro-blast rinse and sandblasting procedure on internal and external parts, followed by a proprietary shot-enticed deep cleaning, setting the standard for Axle assembly remanufacturing.
All tubes are inspected to ensure they are straightened to OEM specifications.
All housings are tested for surface wear and cracks.
100% inspection of all internal parts, including Ring and Pinion’s, Internal Gears, Clutch’s and Carrier’s
100% replacement of bearings, seals, crush sleeves, pinion nuts and shims.
All housings are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
Correct rolling torque established using inch pound measurement’s for precision setup and longevity
- All tubes are inspected to ensure they are straightened to OEM specifications.
- All housings are tested for surface wear and cracks.
- 100% inspection of all internal parts, including Ring & Pinion’s, Internal Gears, Clutch’s & Carrier’s
- 100% replacement of bearings, seals, crush sleeves, pinion nuts and shims.
- All housings are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
- Correct rolling torque established using inch pound measurement’s for precision setup and longevity
Cover Included: Yes
Fluid Capacity: 1.8
Fluid Included: No
Gear Ratio: 3.07
Grade Type: Regular
Pre-Filled Oil: No
Ring Gear Diameter: 7.12
Detailed Fitment Results
| Year | Make | Model | Fitment Notes |
|---|---|---|---|
| 1992 | Jeep | Cherokee | Ratio: 3.07; Dana 30, 7.12 Inch Ring Gear, With ABS, Without Vacuum Disconnect |
| 1993 | Jeep | Cherokee | Ratio: 3.07; Dana 30, 7.12 Inch Ring Gear, With ABS, Without Vacuum Disconnect |
| 1994 | Jeep | Cherokee | Ratio: 3.07; Dana 30, 7.12 Inch Ring Gear, With ABS, Without Vacuum Disconnect |
| 1995 | Jeep | Cherokee | Ratio: 3.07; Dana 30, 7.12 Inch Ring Gear, With ABS, Without Vacuum Disconnect |
| 1996 | Jeep | Cherokee | Ratio: 3.07; Dana 30, 7.12 Inch Ring Gear, With ABS, Without Vacuum Disconnect |
| 1997 | Jeep | Cherokee | Ratio: 3.07; Dana 30, 7.12 Inch Ring Gear, With ABS, Without Vacuum Disconnect |
| 1998 | Jeep | Cherokee | Ratio: 3.07; Dana 30, 7.12 Inch Ring Gear, With ABS, Without Vacuum Disconnect |
| 1999 | Jeep | Cherokee | Ratio: 3.07; Dana 30, 7.12 Inch Ring Gear, With ABS, Without Vacuum Disconnect |
Fitments
- 1992 Jeep Cherokee 2.5L GAS
- 1992 Jeep Cherokee 4.0L GAS
- 1993 Jeep Cherokee 2.5L GAS
- 1993 Jeep Cherokee 4.0L GAS
- 1994 Jeep Cherokee 2.5L GAS
- 1994 Jeep Cherokee 4.0L GAS
- 1995 Jeep Cherokee 2.5L GAS
- 1995 Jeep Cherokee 4.0L GAS
- 1996 Jeep Cherokee 2.5L GAS
- 1996 Jeep Cherokee 4.0L GAS
- 1997 Jeep Cherokee 2.5L GAS
- 1997 Jeep Cherokee 4.0L GAS
- 1998 Jeep Cherokee 2.5L GAS
- 1998 Jeep Cherokee 4.0L GAS
- 1999 Jeep Cherokee 2.5L GAS
- 1999 Jeep Cherokee 4.0L GAS