Ram (4WD) Drive Axle Assembly - Front - Zumbrota Drivetrain - RAA440-10297X3
Details
Front Axle Assembly
RAA440-10297X3
Ratio: 4.88; Chrysler C215F, 8.46 Inch Ring Gear, IFS, Flat Style Axle Snap Ring, Zumbrota Performance Axle Fitted with a Non-Posi Carier
,13,13,15,1500,1500,18,215MM,4.88,440-1470C,8.0IFS,ASSY,ASSY,AXLE,AXLE,CHY,CHY,DIFFS,FRONT,IFS,RAA,RAA,RAM,RAM,ZF,
ZPA, Reman Front Axle Assy, C215F, 8.46" Ring Gear, 2019-21 Ram 1500, 4.88 Ratio
Zumbrota Performance Axle, ZF 215MM IFS Front Axle Assy '19-'21 CHY Ram 1500, New Body Style And 2021 Old Body Style Built Between 11/22/2021 And 12/28/2021, 4.88
Zumbrota Performance Axle, ZF 215mm IFS Axle Assembly 2013-21 RAM 1500 4.88 Ratio
When your lifestyle includes the needs for stronger traction, higher speeds and heavier towing capabilities, Zumbrota Performance Axles check the box. OE replacement is fine until bigger tires, higher horsepower, a boat or trailer require a higher caliber of strength to your drivetrain. This is where aftermarket ratios, limited slip differentials, lockers and high-quality nodular iron differential covers are needed to fit the way you drive. When choosing the best products in performance upgrades, Yukon Gear and Axle products were chosen for the engineering quality and reputation to take on the heaviest in performance and reliability. At Zumbrota, drivetrain axle assemblies are rebuilt to the highest quality standards of precision and reliability. Each Axle assembly is thoroughly inspected for straightness, cracks and surface wear. All internal components are fully inspected and tested including ring and pinions, internal gears, clutches, and carriers. All bearings and seals are replaced. Your choice of gears are fully inspected for optimal tooth contact patterns and correct rolling torque using inch-pound measurements for precise setup and longevity. Positraction and Locker choices finish the upgrade for performance. Zumbrota uses an exclusive hydro-blast rinse and sandblasting procedure on internal and external parts, followed by a proprietary shot-enticed deep cleaning, setting the standard for Axle assembly remanufacturing.
Fits Dodge Ram 1500 1/2 Ton
Front Differential Axle Assembly
4.88 Gear Ratio
Zumbrota Performance Axles are the standard in remanufacturing performance
Aftermarket gear upgrades are provided for enhanced performance for the way you drive
Custom options of Limited Slip Differentials and Lockers provide customized performance for the vehicle owner
High quality nodular steel ZPA differential covers are added to provide the highest strength protection to drivetrain internals
All tubes are inspected to ensure they are straightened to OEM specifications.
All housings are tested for surface wear and cracks.
- Fits Dodge Ram 1500 1/2 Ton
- Front Differential Axle Assembly
- 4.88 Gear Ratio
- Zumbrota Performance Axles are the standard in remanufacturing performance
- Aftermarket gear upgrades are provided for enhanced performance for the way you drive
- Custom options of Limited Slip Differentials and Lockers provide customized performance for the vehicle owner
- High quality nodular steel ZPA differential covers are added to provide the highest strength protection to drivetrain internals
- All tubes are inspected to ensure they are straightened to OEM specifications.
- All housings are tested for surface wear and cracks.
California Proposition 65: WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Cover Included: Yes
Fluid Capacity: 1.2
Fluid Included: No
Fluid Type: 75w-85 GL-5
Gear Ratio: 4.88
Grade Type: Performance
Pre-Filled Oil: No
Ring Gear Diameter: 215
Detailed Fitment Results
| Year | Make | Model | Drive Type | Fitment Notes |
|---|---|---|---|---|
| 2019 | Ram | 1500 | 4WD | Ratio: 4.88; Chrysler C215F, 8.46 Inch Ring Gear, IFS, Flat Style Axle Snap Ring, Zumbrota Performance Axle Fitted with a Non-Posi Carier |
| 2020 | Ram | 1500 | 4WD | Ratio: 4.88; Chrysler C215F, 8.46 Inch Ring Gear, IFS, Flat Style Axle Snap Ring, Zumbrota Performance Axle Fitted with a Non-Posi Carier |
| 2021 | Ram | 1500 | 4WD | Ratio: 4.88; Chrysler C215F, 8.46 Inch Ring Gear, IFS, Flat Style Axle Snap Ring, To 3 / 12 / 2021, and 11 / 22 / 2021 Thru 12 / 28 / 2021, Zumbrota Performance Axle Fitted with a Non-Posi Carier |
| 2021 | Ram | 1500 Classic | 4WD | Ratio: 4.88; Chrysler C215F, 8.46 Inch Ring Gear, IFS, Flat Style Axle Snap Ring, 11 / 22 / 2021 Thru 12 / 28 / 2021, Zumbrota Performance Axle Fitted with a Non-Posi Carier |
Fitments
- 2019 Ram 1500 3.0L DIESEL
- 2019 Ram 1500 3.6L ELECTRIC/GAS
- 2019 Ram 1500 3.6L MILD HYBRID EV-GAS (MHEV)
- 2019 Ram 1500 5.7L ELECTRIC/GAS
- 2019 Ram 1500 5.7L GAS
- 2019 Ram 1500 5.7L MILD HYBRID EV-GAS (MHEV)
- 2020 Ram 1500 3.0L DIESEL
- 2020 Ram 1500 3.6L ELECTRIC/GAS
- 2020 Ram 1500 3.6L MILD HYBRID EV-GAS (MHEV)
- 2020 Ram 1500 5.7L ELECTRIC/GAS
- 2020 Ram 1500 5.7L GAS
- 2020 Ram 1500 5.7L MILD HYBRID EV-GAS (MHEV)
- 2021 Ram 1500 Classic 3.6L FLEX
- 2021 Ram 1500 Classic 5.7L GAS
- 2021 Ram 1500 3.0L DIESEL
- 2021 Ram 1500 3.6L ELECTRIC/GAS
- 2021 Ram 1500 3.6L MILD HYBRID EV-GAS (MHEV)
- 2021 Ram 1500 5.7L ELECTRIC/GAS
- 2021 Ram 1500 5.7L GAS
- 2021 Ram 1500 5.7L MILD HYBRID EV-GAS (MHEV)
- 2021 Ram 1500 6.2L GAS